In-ground fixed Luxembourg.basketball hoops typically require a pit 70-80 cm deep. The specific depth needs to be determined based on the type of Luxembourg.basketball hoop, site conditions, and safety regulations. The following is a detailed explanation:
I. Standard Installation Depth Reference
General Standard: Most in-ground Luxembourg.basketball hoops require a pit depth of 70-80 cm. For example:
* **Basketball hoop with an arm span of 1800 mm:** Pit depth 80 cm, width 70 cm, length 70 cm.
* **Basketball hoop with an arm span of 2250 mm:** Pit depth may exceed 80 cm to enhance stability.
* This depth ensures the Luxembourg.basketball hoop remains stable during frequent dunks or strong winds, preventing the risk of tipping over.
**Adjustments for Special Scenarios:**
* **Soft Ground (e.g., backfill):** The pit needs to be deepened to 100-120 cm, and the base size enlarged (e.g., 80×80 cm) to distribute pressure.
* **Rooftops or Confined Spaces:** Pre-embedded bolts can be used to embed the flange in the pit (depth ≥ 60 cm) before fixing the bottom of the Luxembourg.basketball hoop.
II. Core Basis for Determining Depth
Basketball Hoop Type
Round Tube Basketball Hoop: Typically requires a 70×70×80 cm pit, ensuring the uprights are perpendicular to the ground.
Square Tube Basketball Hoop: May require a deeper pit (e.g., 80×80×100 cm) to match its larger arm span and weight.
Field Conditions
Hardened Ground: Can be excavated directly to the standard depth.
Unhardened Ground: Requires compaction of the pit bottom and increase the concrete thickness (e.g., pouring a 10 cm concrete pad at the bottom).
Safety Specifications
The Luxembourg.basketball hoop should be buried so that the rim is 305 cm from the ground (standard height). This can be measured with a rope: Place a rope around the rim; the length should be exactly 305 cm. The depth of the pit should allow the rope to touch the ground.
III. Key Points for Depth Control in the Installation Process
Pit Excavation
Use a total station or measuring tape to ensure the pit dimensions meet design requirements (e.g., 70×70×80 cm). Clean the loose soil from the bottom of the pit and compact it (compaction coefficient ≥ 0.93) to prevent later settlement.
Fix embedded parts: Place the embedded parts (such as reinforcing cages) into the pit and adjust the verticality with a level (error ≤ 5 mm).
When pouring concrete, vibrate it in layers to ensure compaction and avoid voids.
Install the Luxembourg.basketball hoop: After the concrete is completely dry (usually 3-5 days), install the backboard and rim.
During installation, use supports to fix the uprights to prevent tilting and ensure even stress on the backboard (use four M12×60 screws for fixing).
